10-10-2009 04:21 AM - edited 03-04-2019 06:19 AM
dear all,
pls suggest for following points
sorry for attching jpg file because it difficult to draw topology in notepad
issue
i am getting all the vpnv4 routes on all PEs, i am able to ping vrf IP of another PE but i am not able to ping client end MPLS ip from another PE but its pinging from local PE, although routes are not learning at CE
pls find attached config notepads
Solved! Go to Solution.
10-10-2009 04:59 AM
Sourabh,
You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:
router eigrp 2101
address-family ipv4 vrf MGL
redistribute bgp 10 metric 10000 1000 255 1 1500
Regards
10-10-2009 04:59 AM
Sourabh,
You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:
router eigrp 2101
address-family ipv4 vrf MGL
redistribute bgp 10 metric 10000 1000 255 1 1500
Regards
10-10-2009 07:59 AM
oh yes...thanks a lot for good observation..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: