hub and spoke vpn

Unanswered Question
Oct 10th, 2009
User Badges:

hi techies,

i need to configure hub and spoke between 4 sites ..i have static ip on 1 site ,so that site i am using as hub and other sites are having dynamic ip.and i need to intercommunicate all sites each other through vpn thats why i am using this plz provide me the config ,how to configure hub and spoke sites.

if you have any other method to intercommunicate all sites through vpn plz provide me.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
zeuscyril Sun, 10/11/2009 - 21:48
User Badges:

hi jor,

thank you for ur links.

i need for router to router hub and spoke

example .if u have any example can send to me plz


JORGE RODRIGUEZ Mon, 10/12/2009 - 06:30
User Badges:
  • Green, 3000 points or more

Cyril, sorry I should have asked ..

Go to this link

Mid page down see section under IPSec on Router to Router

U shoudl find what you need to build your ipsec tunnels .

I would first start referencing Configuring Router-to-Router Dynamic-to-Static IPSec with NAT since you have static at the hub and spokes are dynamic, then reference Router-to-Router Hub and Spoke with Communication Between the Spokes section.



This Discussion