I try to deploy 802.1x EAP-TLS in Lab enviroment with ACS 4.2 and
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(46)SE
If I use the PEAP, it is working, but if EAP-TLS, then nothing show in logs on ACS, but error message.
EAP-AUTH-AAA-ERROR: Reply received on stale handle (0x00000000)
If I switch Network Access Profile to another one w/o EAP-TLS then in log I get
12/10/2009 10:23:21 Authen failed [email protected] Default Group XX-XX-XX-XX-XX-XX, other, EAP type not configured
What could be a problem?