10-12-2009 02:13 AM - edited 03-04-2019 06:20 AM
Hello,
I have this old router...I want to use it, but the WIC port is a serial port and I have an Ethernet RJ-45 cable from my ISP. What can I use to convert from RJ-45 to serial?
The router is modular. Can I but another Ethernet card and use it to connect to my ISP?
thank u!
10-12-2009 04:37 AM
Get yourself an AUI transceiver - this will give you another Ethernet Interface.
HTH>
10-12-2009 05:33 AM
Spinu
In your post you refer to the provider connection as "Ethernet RJ45". I am not clear whether you really mean that it is an Ethernet connection or whether you might mean RJ45 and you normally associate that with Ethernet. Some serial connections come as RJ45 (especially when conecting to a CSU/DSU or a router with a built in CSU/DSU. Can you clarify what kind of connection the provider is giving you?
HTH
Rick
10-12-2009 06:00 AM
I have a cable modem connection, and from the modem a RJ45 cable to my computer .. and I want to put this router between the modem and my computer. It is an Ethernet connection.
10-12-2009 09:29 AM
Spinu
This clarification is helpful. The cable modem certainly uses Ethernet for the interface that you will use. So you would need 2 Ethernet interfaces. I am not sure that the 1602 supports 2 Ethernet interfaces.
HTH
Rick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: