ipv6 implementation

Unanswered Question
Oct 12th, 2009
User Badges:

Hi,


What are the prerequisites and necessary conditions that are required to implement an ipv6 based lan setup. I have a 4506, 3560 and a 5500asa firewall, the 2 switches are connected onto the inside zone of the firewall and need to work on ipv6.


Likewise, Do you have any documentation on ipv6 based subnetting.


Regards,

uzair.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Mon, 10/12/2009 - 04:26
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Uzair,

you should be fine with your LAN switches


however, for C4500 the features supported depend from what supervisor is installed and from IOS image


for C3560 see


http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3560/software/release/12.2_46_se/configuration/guide/swipv6.html


you need advanced ip services image


a link to IPv6 tech page


http://www.cisco.com/en/US/tech/tk872/tk373/tsd_technology_support_sub-protocol_home.html


and to config page


http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html


where addressing is explained


and ASA chapter about ipv6


http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/route_ipv6_neighbor.html


Hope to help

Giuseppe



Actions

This Discussion