PoE in 3750 Sw

Answered Question
Oct 12th, 2009

hi,

I am having Cisco 3750 switch and i want to configure PoE feture on that but when i enable power inline mode message is "%CAUTION: Interface interface-id: Misconfiguring the 'power inline consumption/allocation'

command may cause damage to the switch and void your warranty. Take precaution not to

oversubscribe the power supply.Refer to documentation" so please help me how to cconfigure PoE feature in 3750 step by step......

I have this problem too.
0 votes
Correct Answer by Jerry Ye about 7 years 3 months ago

This is not a POE switch. Please see the following link Table 5 row labeled Non-PoE Models.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5023/product_data_sheet0900aecd80371991.html

HTH,

jerry

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jayesh Prajapati Mon, 10/12/2009 - 20:07

model number = cisco WS-C3750G-24TS

IOS = c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin

Leo Laohoo Mon, 10/12/2009 - 21:05

Jerry's right. WS-C3750G-24TS is not a PoE switch.

You can verify if you do the following commands:

sh inventory (and look at the description);

sh power inline (if you don't see any ports, then you are NOT PoE swtich).

Hope this helps.

Actions

This Discussion