10-12-2009 04:42 AM - edited 03-06-2019 08:05 AM
hi,
I am having Cisco 3750 switch and i want to configure PoE feture on that but when i enable power inline mode message is "%CAUTION: Interface interface-id: Misconfiguring the 'power inline consumption/allocation'
command may cause damage to the switch and void your warranty. Take precaution not to
oversubscribe the power supply.Refer to documentation" so please help me how to cconfigure PoE feature in 3750 step by step......
Solved! Go to Solution.
10-12-2009 08:50 PM
This is not a POE switch. Please see the following link Table 5 row labeled Non-PoE Models.
HTH,
jerry
10-12-2009 05:28 PM
What is the full model number of your 3750?
What is your IOS?
10-12-2009 08:07 PM
model number = cisco WS-C3750G-24TS
IOS = c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin
10-12-2009 08:50 PM
This is not a POE switch. Please see the following link Table 5 row labeled Non-PoE Models.
HTH,
jerry
10-12-2009 09:05 PM
Jerry's right. WS-C3750G-24TS is not a PoE switch.
You can verify if you do the following commands:
sh inventory (and look at the description);
sh power inline (if you don't see any ports, then you are NOT PoE swtich).
Hope this helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: