SPA 9000 and SPA 8000 Compatiable?

Stephenzap_2 · ‎10-13-2009

I using a SPA 8000 with a Panasonic wireless phone system (pots)

Can I upgrade to a SPA 9000 and still use the the 8000 with the 9000 for the pots lines?

I need 5 pots lines with the SPA 9000.

Steve

Alberto Montilla · ‎10-20-2009

Dear Sir;

SPA8000 ports are FXS not FXO, so cannot connect lines to it. You would need 2 SPA400s to connect 5 lines (each SPA400 supports 4 FXO ports) in addition to the SPA9000.

Regards
Alberto

Report Inappropriate Content · ‎10-20-2009

https://supportforums.cisco.com/docs/DOC-9857

I did some research and found this, it looks like this will work

Steve

Alberto Montilla · ‎10-26-2009

Dear Sir,

Yes, that will owrk, but please note this is connecting phones, not lines...outbound is always using VoIP.

Regards
Alberto