cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1906
Views
0
Helpful
1
Replies

Enabling BFD in only one side

p.diaz
Level 1
Level 1

Hi Everybody

The theory tells that if BFD stops to receive keepalives, it informs to the routing protocols that the neihgbor is down. If I configure BFD only in one side and associate BFD with the routing protocol, the neighborship goes down?

Thanks

1 Accepted Solution

Accepted Solutions

Laurent Aubert
Cisco Employee
Cisco Employee

Hi,

You need BFD on both side but you could use echo mode on one side only.

I tested it with 12.2(33)SRC2, and configuring BFD on one side only doesn't bring down the IGP adj. The BFD session stays in AdminDown state.

HTH

Laurent.

View solution in original post

1 Reply 1

Laurent Aubert
Cisco Employee
Cisco Employee

Hi,

You need BFD on both side but you could use echo mode on one side only.

I tested it with 12.2(33)SRC2, and configuring BFD on one side only doesn't bring down the IGP adj. The BFD session stays in AdminDown state.

HTH

Laurent.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: