wrong time displayed on Phones - timezone issue

Unanswered Question
Oct 14th, 2009


I have CCM 6.1.2 on VMWare. It has NTP reference configured (its local gateway) and they both have timezone set to LA (UTC -8). SO they show the same, correct time.

HOwever I have IP communicator set to the same timezone (date/time group in device pool) but it shows 10 hours behind.

The CCM was originally configured to be CET and then changed the timezone in CLI ("utils ntp status" looks fine, showing correct time).

So I figured the phone thinks CCM is still in CET and goes 10 hours behind (8 LA, 2 CET)...

Any ideas how to resolve this?

Multiple restarts didn't help

Best regard

Goran Pilat

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
goranpilat Wed, 10/14/2009 - 02:46


Fairly easy. When I plugged IPPhone into the CCM the clock was ok. The thing is that CIPC gets the clock from the PC and its timezones, thus the difference. When I changed the timezone on PC clock immediatelly changed.

What a waste of time....



This Discussion