10-14-2009 03:17 AM - edited 03-15-2019 08:03 PM
Dear all,
I am trying to configure my SIP phones (7960) with a 2821. Is it possible to have my 2821 act as a sip server or should i use an external one?
10-14-2009 03:51 AM
Configure CME on the router, that will control all you telephones just fine. Can work with SIP or SCCP firmware on the phones, the latter is preferred ad it has mode features and supports different languages.
10-14-2009 04:09 AM
Hi.
Well thats ok. But what about the sip server that will be needed. All the config seems to use a sip server (external). Wanted to know if i can configure my 2821 as a sip server itself?
10-14-2009 05:06 AM
Yes, with SIP phones, CME is a SIP server.
But, you will see that SCCP works much better.
10-14-2009 09:32 PM
Ok. Thanks.
Well i already tested SCCP. Works ok with 7960 and CIPC too :). Now going to test sip.
10-14-2009 10:20 PM
You are welcome.
Please remember to rate useful posts with the scrollbox below.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: