10-14-2009 07:19 AM - edited 03-06-2019 08:07 AM
Hey guys,
Can someone point me to a "how to" on stacking switches. What the CLI is for getting them to see each other and so on?
Thanks,
Brent
Solved! Go to Solution.
10-14-2009 07:33 AM
10-14-2009 07:33 AM
10-14-2009 07:35 AM
thanks a ton!
10-14-2009 07:39 AM
Brent,
Here is doc on how to stack them:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/hardware/installation/guide/HGcliSET.html
After stacking them login and make one of the switches master by giving it a higher priority. Priority is between 1 and 15. So I would give the master 14 or 15. I usually give priority to members too like:
Switch-A 14 (Master)
Switch-B 12 (member)
Switch-C 10 (Member)
Switch-D 8 (Member)
Also make sure you have the same image on all of them.
HTH
Reza
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: