10-14-2009 07:19 AM - edited 03-06-2019 08:07 AM
Hey guys,
Can someone point me to a "how to" on stacking switches. What the CLI is for getting them to see each other and so on?
Thanks,
Brent
Solved! Go to Solution.
10-14-2009 07:33 AM
10-14-2009 07:33 AM
10-14-2009 07:35 AM
thanks a ton!
10-14-2009 07:39 AM
Brent,
Here is doc on how to stack them:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/hardware/installation/guide/HGcliSET.html
After stacking them login and make one of the switches master by giving it a higher priority. Priority is between 1 and 15. So I would give the master 14 or 15. I usually give priority to members too like:
Switch-A 14 (Master)
Switch-B 12 (member)
Switch-C 10 (Member)
Switch-D 8 (Member)
Also make sure you have the same image on all of them.
HTH
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide