Capture controller flap with syslog?

Answered Question
Oct 14th, 2009
User Badges:

Anyway that I can capture/log a T3 controller that is flapping? The flap is fast enough that the serial interface does not go down and is not captured in the log. On my console I get the following when the controller flaps.


Oct 13 16:56:43.946: %CONTROLLER-5-UPDOWN: Controller T3 2/0, changed state to down

Oct 13 16:56:44.946: %CONTROLLER-5-UPDOWN: Controller T3 2/0, changed state to up


I am trying to log this.

Correct Answer by Lucien Avramov about 7 years 10 months ago

enable "logging console" and then that will send any message you see on the console to your syslog server.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Lucien Avramov Wed, 10/14/2009 - 15:19
User Badges:
  • Red, 2250 points or more

enable "logging console" and then that will send any message you see on the console to your syslog server.


Lucien Avramov Wed, 10/14/2009 - 16:09
User Badges:
  • Red, 2250 points or more

Great, glad it helped. I guess we can mark this post resolved.

Actions

This Discussion