HWIC 2 FE CARD NOT DETECTED IN isco 2851 Router

Answered Question
Oct 14th, 2009

HI All

,We had installled HWIC 2 FE card on Cisco 2851 with the ios c2800nm-advipservicesk9-mz.124-15.T8 , but the problem is we are not able to detect the FE ports, could some one help on the sam

Adhitya

Wipro

Correct Answer by Jon Marshall about 7 years 4 months ago

Adhitya

Please reread my last post. You do not have the correct IOS to run this card. You need to upgrade your IOS. See previous post for details.

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
adhityakarthik Wed, 10/14/2009 - 19:18

Hi Thanks very much for the quick repsone, please find the out put of the WIC 2 FE module and suggest on the same

WIC Slot 3:

2 Port FE HWIC

WIC module not supported/disabled in this slot

Hardware Revision : 2.0

Top Assy. Part Number : 800-27738-02

Part Number : 73-10677-02

Board Revision : B0

Deviation Number : 0

Fab Version : 02

PCB Serial Number : FOC13331YJU

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : HWIC-2FE

Version Identifier : V01

CLEI Code : COUIAFUCAA

Base MAC Address : 0023.eb46.836a

MAC Address block size : 2

Connector Type : 01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 05 3B 41 02 00 C0 46 03 20 00 6C 5A 02

0x10: 82 49 29 B5 02 42 42 30 88 00 00 00 00 02 02 C1

0x20: 8B 46 4F 43 31 33 33 33 31 59 4A 55 03 00 81 00

0x30: 00 00 00 04 00 CB 92 48 57 49 43 2D 32 46 45 20

0x40: 20 20 20 20 20 20 20 20 20 89 56 30 31 20 D9 02

0x50: 40 C1 C6 8A 43 4F 55 49 41 46 55

Adhitya

Correct Answer
Jon Marshall Wed, 10/14/2009 - 19:25

Adhitya

Please reread my last post. You do not have the correct IOS to run this card. You need to upgrade your IOS. See previous post for details.

Jon

Actions

This Discussion