Wr mem fails on C6K

Unanswered Question
Oct 15th, 2009
User Badges:

C6500-SUP720-3B#wr

%No memory available: Update of NVRAM config failed!

---------------------------------------

has anyone a explanation ? the Configuration is not that big it should definitly fit into the NVRAM, but the box is low on Memory :

Processor Pool Total: 391036432 Used: 366100000 Free: 24936432

I/O Pool Total: 67108864 Used: 10437776 Free: 56671088


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Thu, 10/15/2009 - 04:44
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Emanuael,


check with sh users

if there are other vty sessions open


there might be a sh conf pending on some other vty.


the show proc mem doesn't show the amount of memory in filesystem nvram:


do

dir nvram:


example from a C6500 with sup720B


dir nvram:

Directory of nvram:/


1918 -rw- 149823 startup-config

1919 ---- 24 private-config

1920 -rw- 149823 underlying-config

1 ---- 4 rf_cold_starts

2 ---- 47 persistent-data

3 -rw- 0 ifIndex-table


1964024 bytes total (1811053 bytes free)


Hope to help

Giuseppe




nsn-amagruder Thu, 10/15/2009 - 05:43
User Badges:

service compress-config may help if the last suggestion show the config in NVRAM is large or almosted used.

e.hoehn Thu, 10/15/2009 - 05:52
User Badges:

Hello Guys,

Thanks for the responds, but it actually does ont help ...

here the output (and as I sayed, the config is not that larg ...)


C6K-SUP720-3B#dir nvram:

Directory of nvram:/

1918 -rw- 29322 startup-config

1919 ---- 7175 private-config

1920 -rw- 29322 underlying-config

1 ---- 4 rf_cold_starts

2 ---- 49 persistent-data

3 -rw- 3460 ifIndex-table


1964024 bytes total (1921331 bytes free)


C6K-SUP720-3B#sh conf | i Using

Using 29322 out of 1964024 bytes


Does anyone has other suggestions ?

Actions

This Discussion