10-15-2009 06:36 AM - edited 03-15-2019 08:05 PM
Recently converted GW from MGCP to H323. Inbound CNAM is no longer displaying. Is there a config option in the dial-peer? Thanks
10-15-2009 06:43 AM
Try
voice service voip
qsig decode
10-15-2009 06:59 AM
Thanks for the response. Dont see that option. IOS 12.3(11)T8
allow-connections
cause-code
default
exit
fax
h323
modem
no
redirect
shutdown
signaling
sip
supplementary-service
10-15-2009 06:47 AM
Hi!
Please refer to:
--> H.323 Name Display
http://www.cisco.com/en/US/docs/ios/12_4/12_4x/release/notes/rn2800xw.html#wp363697
And check that on the H.323 GW configuration page on the CUCM admin the "Display IE Delivery on GW" checkbox.
HTH!
Regards,
Teresa.
If it helps, please rate.
10-15-2009 07:41 AM
This helps alot. Looks like I need to upgrade to 12.4. Currently, its on 12.3
Thanks again, for the response
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide