10-15-2009 06:36 AM - edited 03-15-2019 08:05 PM
Recently converted GW from MGCP to H323. Inbound CNAM is no longer displaying. Is there a config option in the dial-peer? Thanks
10-15-2009 06:43 AM
Try
voice service voip
qsig decode
10-15-2009 06:59 AM
Thanks for the response. Dont see that option. IOS 12.3(11)T8
allow-connections
cause-code
default
exit
fax
h323
modem
no
redirect
shutdown
signaling
sip
supplementary-service
10-15-2009 06:47 AM
Hi!
Please refer to:
--> H.323 Name Display
http://www.cisco.com/en/US/docs/ios/12_4/12_4x/release/notes/rn2800xw.html#wp363697
And check that on the H.323 GW configuration page on the CUCM admin the "Display IE Delivery on GW" checkbox.
HTH!
Regards,
Teresa.
If it helps, please rate.
10-15-2009 07:41 AM
This helps alot. Looks like I need to upgrade to 12.4. Currently, its on 12.3
Thanks again, for the response
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: