Cisco 7937 audio-input interface?

Unanswered Question
Oct 15th, 2009

Does the 7937 have an audio-input interface that we can connect to amplifier/speaker system?

We have very large conference rooms where conf calls from one site to the other take place. But due to size of conf rooms, not all participants can hear (even with three 7937's and mic-extenders all joined into meet-me conf). So were hoping we can hook into overhead speakers so everyone can here call.

Regards,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
testeven Thu, 10/15/2009 - 06:56

Hi!

According to Pg 40. "Audio Auxiliary Port":

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7937g/6_0/english/administration/guide/37adm60.pdf

"The side of the conference station includes this port:

•Audio auxiliary port-Labeled with stenciled audio input/output symbol

The audio auxiliary port is on the right side of the conference station under a flap you flip open. Use the audio serial port to facilitate

full-duplex connections to an optional mobile conference station device. You must use a straight-through cable on this port. Figure 3-4 shows

how to connect the optional device to the conference station."

HTH!

Regards,

Teresa.

If it helps, please rate.

jmarateo Mon, 11/01/2010 - 11:55

You can use the  Polycom wireless lapel mic (Part #2200-00699-001)

does work with the 7937. It doesn't directly connect, but after an RCA to 3/32" jack adapter you're in business.

Actions

This Discussion