10-15-2009 02:05 PM - edited 03-06-2019 08:09 AM
Hi
I have 1811 router.It has FastEthernet and Dial up Interface.I want to use this router to connect to Internet via FastEthernet as Primary Connection and if this fails I want to connect to INternet via Dialup Interface.Is there a way to achieve this configuration other than IP SLA ?
Thanks
10-15-2009 02:39 PM
Are you doing that over ISDN or T1?
If you have dialer interface, you can use the backup keyword for this.
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a008010456b.shtml
10-15-2009 05:40 PM
I am using DSL high speed connection
10-16-2009 08:46 AM
Any ideas ?
10-19-2009 12:32 PM
I am using DSL high Speed Connection as primary
10-19-2009 12:36 PM
It would be ip sla with a tracking object or EEM with tracking the sla operation
10-19-2009 12:59 PM
I know how IP SLA works but EEM ?can you please elaborate or provide link
Thanks
10-19-2009 03:16 PM
I would say the easiest is to use object tracking with IPSLA.
EEM would involve a more complex configuration.
Check this post which provides an example of IP SLA with EEM:
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: