Converted Aironet 1242 DHCP problem

Unanswered Question

Hi there

I converted a few Cisco Aironet 1242 AP's form autonomous to LWAPP. Conversion proces is ok, i can see that the ap connects to the controller (upgrading image) and then reboots. After that, nothing there. I consoled the AP and this is the message:

Not Sending discovery request AP does not have an ip !

The ap is not getting an dhcp ip address. When connecting my laptop to the network patch, my laptop is receiving an ip addess in the correct scope.. What can this be ?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Steven van Jaarsveld Mon, 10/19/2009 - 03:02

Hi There

I presume that the other LWAPP AP's are working without any issues here and that the necessary VLAN, DHCP Option 43 and Code 241 (Windows DHCP) have been configured.

Did the AP have a DHCP or statically assigned IP before the conversion?


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode