CCME GUI

Jayesh Prajapati · ‎10-16-2009

hi I am installing CCME 3.3 in Cisco 3845 router and it's working fine ip phone also working htere is no problem.but when i open it in GUI it's not open ,nothing happen. actually i configure and enable GUI also "IP http server" also enable so please can you helpme what's proble here i also attached my configration.

paolo bevilacqua · ‎10-16-2009

Where the files are kept? You may need "ip http path ..."

Jayesh Prajapati · ‎10-16-2009

Hi,

I already given Ip http path

ip http server

ip http authentication local

no ip http secure-server

ip http path flash:

James Hawkins · ‎10-17-2009

Have you checked that you have the required files for the GUI in the flash memory?

It may be worth reinstalling them even if they are there if you have download access to the link below:

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-key

s-adhikary · ‎10-17-2009

hi

Thanks for your help it's mostly Resolve my issue but still i cant open it. here i have attached my configuration file and sh flash command where i have extract .tar file please se it and help me why it's not open.