881W using Cisco Unified Mode

Unanswered Question
Oct 16th, 2009
User Badges:

I am looking into configuring an 881W to leverage WLC devices on our network. They follow the same paradigm as the LWAP's so I understand the DHCP option 43 and all of the tunneling and discovery process. However, I have a question about how the embedded AP grabs it's IP address. According to the documentation the DHCP pool is setup and it is tied to a VLAN 1 interface. Does this need to be? I have three different pools of DHCP defined on the router for voice, wireless, and wired and I want to make sure the embedded AP always grabs from the Wireless pool which is not currently associated with VLAN 1. The information I am looking at is from the "Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide". Thanks in advance for your help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode