10-16-2009 01:41 PM - edited 03-15-2019 08:06 PM
Hello,
Im currently having an issue that dont understand. Im restricting calling id in CUCME lines and it works when calling to another CUCMEs and legacy PBX.
If i make the same call to my CUCM7 (via gatekeeper), the line number appears!
Is there any setting to change this behaviour?
thanks
met.
10-16-2009 01:46 PM
Hey,
In the route pattern you should be able to set your Calling Line ID Presentation and Calling Name Presentation to restricted.
TONY
10-16-2009 01:55 PM
Yes i see, but i want it to respect the CUCME configuration from the caller that calls to the CUCM7 user. (users in CUCME that are restriced appear restricted, those who dont want to restrict their number shows up on CUCM7 phone)
Wich option respects the CUCME configuration?
thanks
met.
10-19-2009 03:17 AM
Can't anyone help with this issue:
In CUCME i set on the ephone-dn:
-> caller-id block
When this phone calls to CUCM7 via intercluster trunk (GK controllerd), the called-id appears in the ip phone registered in CUCM7!
Thanks,
met.
10-19-2009 03:57 AM
You may have to contact the TAC as it appears that teh VOIP connection is not honoring your clid restriction.
You could try applying a translation rule also but that would be just a partial work-around.
10-19-2009 07:13 AM
Yes it seems that's the best option.
I'll give feedback later in case someone experiences the same problem.
tnx
met.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide