CME and E.164

Unanswered Question
Oct 17th, 2009

does CME support + sign? or E.164 dial plan? who has some doc to share?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
study_voip Sat, 10/17/2009 - 20:20

thx for your reply.

if incoming call is national, can CME prefix +1? if it is international, can CME remove 011 then prefix +1?

basicly, I am trying to align the CME with CUCM ver7

virverma Sat, 10/17/2009 - 20:29


I am looking more into this,

Are you trying to forward call to some other destination with + or full e.164 number,

just wanted to have more idea about the situation

study_voip Sat, 10/17/2009 - 20:41

sorry, let me explain again.

CUCM ver7 has below features

1, if incoming call digits are 10D, gw consider it as national call, so CUCM prefix +1, shown on IP phone, either calling ID or missed calls, it could be +1 and 10D

2, if IP phone see +sign, then CUCM can decide how to prefix digit when making outgoing call

and many more

I am wondering if CME has those features


virverma Sat, 10/17/2009 - 21:18

For prefixing 9 or the outside dial-code for missed call entries,

please try the following :-

Voice translation-rule 1 (match anything from the PSTN and prefix it with a 9)

rule 1 /^\(.*\)/ /9\1/

voice translation-profile prefix9_inbound

translate calling 1

voice-port 0/0/0:23

translation-profile incoming prefix9_inbound

to test voice translation-rule,

Let me know

Paolo Bevilacqua Sun, 10/18/2009 - 02:48

rule 1 /^\(.*\)/ /9\1/

This can be written more concisely

rule 1 // /9/

furthermore it does not handle international calls, thing that you can do using plan/type attributes in the rule.

paolo.moserle Fri, 04/19/2013 - 04:42

I have a similar question:

I try to place a call whit jabber client on iPhone, I select a contact from my conctact list, that have a prefix +39, so my default digit to place a call is 0. Is there a way to intercept che call from jabber and translate that from "+" to "000" ?



This Discussion