10-18-2009 06:00 AM - edited 03-04-2019 06:24 AM
Hi,
I have installed on HWIC-4B-S/T module in Cisco 3825 router,but the router is not detecting the module.....Please urgent help is required.....
regards,
10-18-2009 06:19 AM
Hello Venkataraman,
post a sh ver of your router
have you powered off the router before inserting the HWIC?
Hope to help
Giuseppe
10-18-2009 06:29 AM
Hi Giuseppe,
Once I get the sh ver I will be forwarding it to you,meantime the IOS ver is 12.3,will it support?
regards,
10-18-2009 06:39 AM
Hi Giuseppe,
Please see the below attached SH VER out put.
Cisco IOS Software, 3800 Software (C3825-SPSERVICESK9-M), Version 12.3(11)T8, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Thu 06-Oct-05 06:13 by kehsiao
ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
BNC-Router-c3825 uptime is 3 hours, 1 minute
System returned to ROM by power-on
System restarted at 11:17:26 UTC Sun Oct 18 2009
System image file is "flash:c3825-spservicesk9-mz.123-11.T8.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 3825 (revision 1.0) with 227328K/34816K bytes of memory.
Processor board ID FCZ0943732L
2 Gigabit Ethernet interfaces
4 Serial interfaces
3 ISDN Basic Rate interfaces
1 ATM interface
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
62720K bytes of ATA System CompactFlash (Read/Write)
Configuration register is 0x2102
The router is not accepting HWIC-4T module also.
Regards,
10-18-2009 08:48 AM
You need to update your old IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide