cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1505
Views
0
Helpful
2
Replies

Basic setup for SPA3102

daniel
Level 1
Level 1

Hi, I've got this information from my ISP for using with VOIP but I am not really sure where to configure it on the SPA3102:

SIP-username

SIP-password

SIP-Server

Voicemail

Username

Password

Thanks in advance!

/Daniel

1 Accepted Solution

Accepted Solutions

dhames
Level 1
Level 1

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

View solution in original post

2 Replies 2

dhames
Level 1
Level 1

If you have your PC plugged into the yellow Ethernet port on the SPA3102, then you will need to access the device's interface by going to: http://192.168.0.1/admin/voice/advanced/

Once the GUI loads:

-Click on the "Line 1" tab.

-Scroll down until you see "Proxy and Registration" and "Subscriber Information"

That should do it.

Thanks, I thought that was the place to change the settings but it feels better to getting it confirmed :).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: