Cisco 7600 and BGP multipath

Answered Question
Oct 19th, 2009
User Badges:

Hi all!

For software image c7600rsp72043-ipservicesk9-mz.122-33.SRD.bin Cisco announces BGP4 Multipath support, but in CLI I can't found command 'maximum-path n'. There is a log:


gw(config)#ma?

mac mac-address-table map-class map-list


gw(config)#router bgp 1234

gw(config-router)#ma?

% Unrecognized command


Correct Answer by Giuseppe Larosa about 7 years 8 months ago

Hello Maksim,


you need to go under address-family ipv4 unicast


router bgp 1234

address-family ipv4 unicast


router(config-router-af)#maximum-paths ?

<1-32> Number of paths

ibgp iBGP-multipath


router(config-router-af)#maximum-paths ibgp ?

<1-32> Number of paths


router(config-router-af)#maximum-paths ibgp


taken on a C7609-S with


sh ver | inc image

System image file is "bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRC.bin"



Hope to help

Giuseppe


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Mon, 10/19/2009 - 04:12
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Maksim,


you need to go under address-family ipv4 unicast


router bgp 1234

address-family ipv4 unicast


router(config-router-af)#maximum-paths ?

<1-32> Number of paths

ibgp iBGP-multipath


router(config-router-af)#maximum-paths ibgp ?

<1-32> Number of paths


router(config-router-af)#maximum-paths ibgp


taken on a C7609-S with


sh ver | inc image

System image file is "bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRC.bin"



Hope to help

Giuseppe


Actions

This Discussion