CME to CME through gatekeeper silent call

Hythim Ali El Hadad · ‎10-13-2009

Hi,

Kindly I have DN 601 & 602 registered to CME 1

And 501 & 502 registered to CME 2

Both CMEs talk to each other through a GK

Both CMEs are registered to the GK

GK#sh gatekeeper endpoints

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

10.1.10.1 1720 10.1.10.1 63536 GK VOIP-GW

E164-ID: 501

E164-ID: 502

Voice Capacity Max.= Avail.= Current.= 0

10.2.10.1 1720 10.2.10.1 54112 GK VOIP-GW

E164-ID: 601

E164-ID: 602

Voice Capacity Max.= Avail.= Current.= 0

Total number of active registrations = 2

The case is that I can call from CME1 to CME2 and vise versa but there is no sound at all

Always silent call

CME1 & CME2 & GK are connected to the same switch on a lab

No firewalls nor routing issues

thanks for your help

Hythim Ali El Hadad · ‎10-13-2009

yes

I found this issue when I tried to call from CME1 to CME2 but the call give fast busy

So it was CME1 cann't ping CME2 so I added the needed routes

Now all can ping

So the call successfully ring the other side

but no sound

thanks for your care

paolo bevilacqua · ‎10-19-2009

Begin making calls without GK.

After that is successful you can move on.

Hythim Ali El Hadad · ‎10-20-2009

Hi,

This morning,after powering on the 3-routers and the switch, I can hear the other site !!)

Thanks alot for your help paolo

paolo bevilacqua · ‎10-19-2009

Can ping from CME 1 to 2 ?