10-13-2009 07:07 AM - edited 03-18-2019 10:44 AM
Hi,
Kindly I have DN 601 & 602 registered to CME 1
And 501 & 502 registered to CME 2
Both CMEs talk to each other through a GK
Both CMEs are registered to the GK
GK#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.1.10.1 1720 10.1.10.1 63536 GK VOIP-GW
H323-ID: CME1@cisco.com
E164-ID: 501
E164-ID: 502
Voice Capacity Max.= Avail.= Current.= 0
10.2.10.1 1720 10.2.10.1 54112 GK VOIP-GW
H323-ID: CME2@cisco.com
E164-ID: 601
E164-ID: 602
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 2
The case is that I can call from CME1 to CME2 and vise versa but there is no sound at all
Always silent call
CME1 & CME2 & GK are connected to the same switch on a lab
No firewalls nor routing issues
thanks for your help
10-13-2009 07:07 AM
yes
I found this issue when I tried to call from CME1 to CME2 but the call give fast busy
So it was CME1 cann't ping CME2 so I added the needed routes
Now all can ping
So the call successfully ring the other side
but no sound
thanks for your care
10-19-2009 12:16 PM
Begin making calls without GK.
After that is successful you can move on.
10-20-2009 12:21 AM
Hi,
This morning,after powering on the 3-routers and the switch, I can hear the other site !!)
Thanks alot for your help paolo
10-19-2009 10:18 AM
Can ping from CME 1 to 2 ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: