Cisco ISO Loading to 4900 Switch.

Unanswered Question
Oct 19th, 2009

Hi All,

I am currently running cisco IOS and want to load fresh Cisco IOS. I connected the G1/2 into the TFTP server computer. The TFTP server interface is 10.0.0.2. I am unable to assign the ip address to the G1/2. how can I do the file tranfer from the computer to the switch bootflash and load the switch using the new image.

Thank you,

Siva

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Lucien Avramov Mon, 10/19/2009 - 12:49

you need to make g1/2 a non switchport.

issue no switchport on the interface g1/2 and then assign an ip.

sivaprakasam81 Mon, 10/19/2009 - 13:24

Thank you. I have done the tranfer of IOS image via VLAN1. I am unable to delete the VLAN information on the Switch. It is sandalone Switch. Not connected with any switch.

Cisco 4900 Switch.

Switch#dir cat4000_switch:

iyde Wed, 10/21/2009 - 04:23

And be aware that VLAN1 cannot be deleted. It's the default VLAN.

HTH

Actions

This Discussion