cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
911
Views
10
Helpful
4
Replies

Cisco ISO Loading to 4900 Switch.

sivaprakasam81
Level 1
Level 1

Hi All,

I am currently running cisco IOS and want to load fresh Cisco IOS. I connected the G1/2 into the TFTP server computer. The TFTP server interface is 10.0.0.2. I am unable to assign the ip address to the G1/2. how can I do the file tranfer from the computer to the switch bootflash and load the switch using the new image.

Thank you,

Siva

4 Replies 4

Lucien Avramov
Level 10
Level 10

you need to make g1/2 a non switchport.

issue no switchport on the interface g1/2 and then assign an ip.

Thank you. I have done the tranfer of IOS image via VLAN1. I am unable to delete the VLAN information on the Switch. It is sandalone Switch. Not connected with any switch.

Cisco 4900 Switch.

Switch#dir cat4000_switch:

Issue a dir all command and find out where the vlan.dat is.

And be aware that VLAN1 cannot be deleted. It's the default VLAN.

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: