ASR 1002 error

Unanswered Question
Oct 19th, 2009

Anyone know what this error means:

%CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error TXSPI0 Async FIFO High Data ECC1 Error, param 17 param c8

I am getting this on my new ASR1002 configured as follows:

Chassis type: ASR1002

Slot Type State Insert time (ago)

--------- ------------------- --------------------- -----------------

0 ASR1002-SIP10 ok 3d05h

0/0 4XGE-BUILT-IN ok 3d05h

0/1 SPA-5X1GE-V2 ok 3d05h

R0 ASR1002-RP1 ok, active 3d05h

F0 ASR1000-ESP10 ok, active 3d05h

P0 ASR1002-PWR-AC ok 3d05h

P1 ASR1002-PWR-AC ok 3d05h

Slot CPLD Version Firmware Version

--------- ------------------- ---------------------------------------

0 07120202 12.2(33r)XN2

R0 08011017 12.2(33r)XN2

F0 07091401 12.2(33r)XNB

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
muru amir Sun, 04/14/2013 - 23:04

This is seem to be as  bug. please have a look on the below.

CSCsv71393 Bug Details

ASR: %CMCC-3-PLIM_STATUS observed on SPA

%CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error RXSPI3 DIP4 Error, param 16 param 1 observed on SPA

When traffic is sent at higher rates on SPA-8XOC12-POS SPA, CMCC-3-PLIM_STATUS errors are seen and some packet drops would be observed on the SPA.




This Discussion