AIP-SSM-10 auto update issue

Unanswered Question
Oct 19th, 2009

Hi! experts

I using AIP-SSM-10 module on ASA 5540

But it is not working auto update signature.

So I `m going to attach " show statistics host" result.

Can you tell me some help?

Thanks in advance

Auto Update Statistics

lastDirectoryReadAttempt = 07:34:50 UTC Tue Oct 20 2009

= Read directory: https://198.133.219.25/cgi-bin/ida/locator/locator.pl

= Error: AutoUpdate exception: HTTP connection failed [1,0]

lastDownloadAttempt = N/A

lastInstallAttempt = N/A

nextAttempt = 04:00:00 UTC Wed Oct 21 2009

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
andrey.dugin Tue, 10/20/2009 - 05:17

Does your management interface ip-address have an access to Internet directly via NAT or using proxy?

andrey.dugin Tue, 10/20/2009 - 22:52

It is clear that mgmt ifaces are able to connect to the Internet but if they may connect to inet via proxy you must configure proxy-server.

rhermes Wed, 10/21/2009 - 06:55

To test https connectivity, you can create a service account on your sensor and try to telnet to 198.133.219.25 port 443

Actions

This Discussion