Traffic visibility - Restriction Option - ASA 5520

Answered Question
Oct 20th, 2009
User Badges:

Hi, I have ASA 5520 sitting between Backbone_Switch and Internet_RTR

ASA is running Site-2-Site VPN, Remote Access VPN, Inbound+Outbound SMTP and Internet_browsing

traffic for LAN users.


How could I know each service is accumulation how much bandwidth?

example ( How much internet_browsing traffic usuage in-out traffic )


Total bandwidth 6MB.


Possible to have bandwidth limitation on ASA based on services for inbound/outbound traffic ( site-2-site vpn, SMTP, RA, Internet traffic from LAN )



Correct Answer by Panos Kampanakis about 7 years 7 months ago

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.


As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.


I hope it helps.


PK


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Panos Kampanakis Tue, 10/20/2009 - 06:25
User Badges:
  • Cisco Employee,

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.


As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.


I hope it helps.


PK


Actions

This Discussion