10-21-2009 02:18 AM - edited 03-15-2019 08:09 PM
Hello,
I've been asked to check if an NM-HDA can be used as a hardware resource for conferencing. Everything I can find on CCO points to NO, but I'd just like to make sure.
Can anyone say if they have done this or if it is supported?
They have a 2651XM running 12.3(4).T11
Thanks
Chris
Solved! Go to Solution.
10-21-2009 09:12 AM
It's NOT supported
Prerequisites for Conferencing and Transcoding for Voice Gateway Routers
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1034467
HTH
java
if this helps, please rate
10-21-2009 09:12 AM
It's NOT supported
Prerequisites for Conferencing and Transcoding for Voice Gateway Routers
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp1034467
HTH
java
if this helps, please rate
10-21-2009 01:51 PM
Hi,
Many thanks.
I'd told them it wouldn't but I really needed the confirmation, thanks.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide