Auto config archive of FWSM with LMS 3.2

Unanswered Question
Oct 21st, 2009
User Badges:
  • Bronze, 100 points or more


is there a way to archive the config files of a FWSM automatically such as from a switch?

I looked for syslog messages like I get them from switches (%SYS-5-CONFIG). But I can't find anything like that.

Severity level is notification on FWSM.

Is there a way to trigger Config fetch in RME?

Thanks a lot!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
yjdabear Wed, 10/21/2009 - 05:38
User Badges:
  • Gold, 750 points or more

The default "Config Fetch" under RME - Tools - Syslog - Automated Actions has an entry "PIX-*-5-111005:*". Extrapolating from that, perhaps you want to edit "Config Fetch" or build your own AA by adding in "FWSM-*-5-111005:*", and possibly ""ASA-*-5-111005:*" for the sake of being comprehensive.

Error Message %FWSM-5-111005: IP_address end configuration: OK

Explanation This message is logged when you exit the configuration mode. The IP_address value indicates whether the login was made at the console port or through a Telnet connection.

Recommended Action None required.


This Discussion