xmodem issue

Unanswered Question
Oct 21st, 2009
User Badges:

I have to use xmodem to recover IOS for switch 3750 because the current ios was lost.

when i tried to type: copy xmodem: flash:c3750-ipbasek9-mz.122-35.SE5.bin

i got "Begin the Xmodem or Xmodem-1K transfer now...". So I began send file with xmodem, I got the error prompt "Xmodem operation was canceled by remote peer". I also could not finish the file transfer.

Please help me and give any advice, thx a lot!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Rawa Salah Wed, 10/02/2013 - 09:27
User Badges:

dear 


write this  " flash_init"   , then do the transfer to Xmodem ............... the error will be solve,

Wilson Bonilla Sun, 10/06/2013 - 19:35
User Badges:
  • Silver, 250 points or more

Hi.


The terminal is not ready to copy the file, either the flash isn't ready or there's not enough space, like Rawa said, from rommon type flash_init to get it ready.


And second: make sure there's enough space in flash, dir flash: to check free space.


Regards.

Wilson B

Actions

This Discussion