Dial-Peer with Prefix Giving Second Dialtone - CME

Unanswered Question
Oct 21st, 2009
User Badges:

Hello All,


I'am having an issue with a dial-peer I having giving an additional dial tone to request more digits, this is CME. I'am implimenting 4 digit dialing. A remote location has DID's with the last 4 of 52XX, I want to dial 52XX and get it changed to the full number. I have blocked out the area code and the first 3 digits of the remote location number in the following dial peer. When I dial 5200 I get a second dial tone from my CME and then if i dial 5200 again it works, why am I recieving the second dial tone? Thanks


dial-peer voice 2006 pots

destination-pattern 52..

port 0/1/0:23

forward-digits 10

prefix ******

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Wed, 10/21/2009 - 08:30
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

On the remote location CME, configure:


dial-peer voice 1 pots

incoming called-number .

direct-inward-dial


Actions

This Discussion