10-21-2009 08:56 AM - edited 03-10-2019 04:44 PM
Hi all
Please suggest how to install new ACS 1113 box in the live network,e.g how to change the ip add of box ,is that acs hardware appliance booted with acs softwareor i have to install it?
I got three CDs with box.
Please help me
Solved! Go to Solution.
10-21-2009 09:04 AM
Hi sandeep,
You first need to connect ACS SE bottom NIC with production switch. Upon booting you need to check whether its pre-loaded with latest/other images.
Latest image is 4.2.0.124 for 1113
Establishing a serial console connection:
ACS SE initial configuration
Setting ip address:
Complete command reference:
HTH
JK
Plz rate helpful posts-
10-23-2009 01:07 AM
Sandeep,
To get that option you need to add a aaa-client in the network configuration.
acs--->network configuration--->aaa client-->add "Authenticate using Tacacs+ Cisco IOS"
Now you will see that option.
Regards,
~JG
Do rate helpful posts
10-23-2009 03:36 AM
Hi Sandeep,
Thats expected, In order to get it available there you atleast need to add one AAA NAS devices with authenticate using tacacs+ Cisco IOS.
# Here is the path #
------------------
Under Network Configuration -> click Add Entry below the AAA Clients table ->
* AAA Client Hostname
** AAA Client IP Address
*** Shared Secret
***** Network Device Group
****** Authenticate Using -> TACACS+ (Cisco IOS)
******* Hit Submit+ Apply
# TIPS #:
-The shared sceret key should be exact same the one you have entered on the router/switch for tacacs authentication.
-Don't check this option "Single Connect TACACS+ AAA Client" This might create problems for you.
You may refer below listed link for complete information:
HTH
JK
Plz rate helpful posts-
10-21-2009 09:04 AM
Hi sandeep,
You first need to connect ACS SE bottom NIC with production switch. Upon booting you need to check whether its pre-loaded with latest/other images.
Latest image is 4.2.0.124 for 1113
Establishing a serial console connection:
ACS SE initial configuration
Setting ip address:
Complete command reference:
HTH
JK
Plz rate helpful posts-
10-22-2009 09:35 PM
Hi,JK
Very much thanks for u r support.
Now i can access the gui interface of AAA server.
But i dont get tacacs+(Cisco IOS ) option under interface configuration.
Is their any image problem or i have to enable any other option on AAA server?
10-23-2009 01:07 AM
Sandeep,
To get that option you need to add a aaa-client in the network configuration.
acs--->network configuration--->aaa client-->add "Authenticate using Tacacs+ Cisco IOS"
Now you will see that option.
Regards,
~JG
Do rate helpful posts
10-23-2009 03:36 AM
Hi Sandeep,
Thats expected, In order to get it available there you atleast need to add one AAA NAS devices with authenticate using tacacs+ Cisco IOS.
# Here is the path #
------------------
Under Network Configuration -> click Add Entry below the AAA Clients table ->
* AAA Client Hostname
** AAA Client IP Address
*** Shared Secret
***** Network Device Group
****** Authenticate Using -> TACACS+ (Cisco IOS)
******* Hit Submit+ Apply
# TIPS #:
-The shared sceret key should be exact same the one you have entered on the router/switch for tacacs authentication.
-Don't check this option "Single Connect TACACS+ AAA Client" This might create problems for you.
You may refer below listed link for complete information:
HTH
JK
Plz rate helpful posts-
10-27-2009 02:27 AM
Thank u very much for support
now i get the option under interface mode
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide