Network Object Groups

Answered Question

Hello,


On an ASA5510 v8.0(4) is there a way to create a network object group and enter a range of addresses rather than entering them one at a time? For instance I have a group that will need IP address 192.168.1.60 to 192.168.1.75. Do I have to enter them one at a time?


Thank you in advance.

Andrea

Correct Answer by Jon Marshall about 7 years 6 months ago

Andrea


You cannot enter as a range but with the IP range you give above you could enter a subnet/mask pair ie.


network-object 192.168.1.60 255.255.255.240


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 10/21/2009 - 11:26
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Andrea


You cannot enter as a range but with the IP range you give above you could enter a subnet/mask pair ie.


network-object 192.168.1.60 255.255.255.240


Jon

Actions

This Discussion