10-21-2009 11:21 AM - edited 03-11-2019 09:29 AM
Hello,
On an ASA5510 v8.0(4) is there a way to create a network object group and enter a range of addresses rather than entering them one at a time? For instance I have a group that will need IP address 192.168.1.60 to 192.168.1.75. Do I have to enter them one at a time?
Thank you in advance.
Andrea
Solved! Go to Solution.
10-21-2009 11:26 AM
Andrea
You cannot enter as a range but with the IP range you give above you could enter a subnet/mask pair ie.
network-object 192.168.1.60 255.255.255.240
Jon
10-21-2009 11:26 AM
Andrea
You cannot enter as a range but with the IP range you give above you could enter a subnet/mask pair ie.
network-object 192.168.1.60 255.255.255.240
Jon
10-21-2009 11:36 AM
Jon,
Thank you very much!
Andrea
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: