QoS class-map per TCP and UDP

Unanswered Question
Oct 21st, 2009
User Badges:


I would like to implement QoS policy for "output" traffic and I would like to priority data per UDP and TCP (i.e. UDP has high priority and TCP has low priority).

Would you please give me some advice on how to match the classess to UDP and TCP packets. Thanks.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Marshall Wed, 10/21/2009 - 13:00
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


I'm thinking there is probably more to your question but -

access-list 101 permit udp any any

access-list 102 permit tcp any any

then use these access-lists within your class maps.


hugh2_nguyen Wed, 10/21/2009 - 14:06
User Badges:


Thanks for the inputs. Yes, I would like to do more than just UDP and TCP prioritization. But I would like to try simple policy with TCP and UDP first then go from there.

Oh can I filter UDP by port numbers?




This Discussion