how to see logs on the console or via vty prompt

Unanswered Question
Oct 22nd, 2009
User Badges:

Hello All,


I want to configure my switch to show me logs of all the activities performed by a any specific user which is created on that switch.


I donot have tacacs server .



I have used the below command to achive so but cudnt succeed.


aaa new-model

aaa authentication login default group tacacs+ local

username test privilege 15 password 0 test



But when i see sh log command it is only shows as below-


%SYS-5-CONFIG_I: Configured from console by test1 on conso

le


But i want to see some thing as test1 user has shutdown vlan 10 for example and if any other user also do some global changes on the switch it should show exactly in the switch lile what that user has done.


Can this be possible, please help me .


Appreciate your help.


Thanks,

Mirza.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Thu, 10/22/2009 - 06:43
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

At this moment, you can only do that in routers, not switches - with the 'archive logging enable' command


http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_a1.html#wp1018716


Without this command, you need a TACACS+ server and have AAA accounting configured in the switch.


Regards


Edison.


mirzaakberali Thu, 10/22/2009 - 21:31
User Badges:

Hello Edison,


Thanks for your post!


I am not able to achieve my desired result


with the above post.


Can you suggest me how this command will help me to show per user log of their changes what i type in the global mode.. when we want to see in Sh log command.




Thanks,

Mirza.

thinakraj Fri, 10/23/2009 - 04:11
User Badges:

hi try this,


logging history notifications

logging trap notifications

logging source-interface Vlan1

logging 192.168.X.X



192.168.x.x is your logging server.



Thaks.

Thinakaraj.M


Actions

This Discussion