10-22-2009 07:51 AM - edited 03-06-2019 08:15 AM
everyone, I have been reading a little on ipv6, can anyone tell me what you need to an Ipv6 host and a ipv4 host to see each other, as I believe they cannot talk directly, Or is there nothing that would make them communicate ?
10-22-2009 08:41 AM
You need same version for hosts to talk.
However, if you have lets say ipv6 hosts on an ipv4 network, you can configure ipv6 to be tunneled in ipv4.
06-11-2010 08:57 AM
Hi There
Can you tell me how ipv6 is tunneled in ipv4, does each different ipv6 adresses have to be tunneled in a different ipv4 address, or can 1 ipv4 address tunnel many ipv6 addresses?
please explain
thanks
Carl
06-11-2010 09:10 AM
Hi Carl
The below option are available for communication for IPv6 to IPv4.
1] Tunneling
2] Translator
4] Dual Stack
Please refer the below link for detail & for Configuration.
http://www.soi.wide.ad.jp/class/99007/slides/24/36.html
http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a00800b49a5.shtml
Regards
Chetan Kumar
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: