10-22-2009 06:49 PM - edited 03-18-2019 10:45 AM
Hi,
I have a quest about the sip register. I can make in/out call via the sip trunk but the register is failed. Do you know what the function of sip register is ?
nshk-cme#sh sip-ua register status
Line peer expires(sec) registered
============ ============= ============ ===========
2024491446 888891 40 no
nshk-cme#
-----------------------------------
Thanks
Leung Che Man
10-22-2009 07:10 PM
Do u in fact need to register any account for this?
Most provides require authentication other P2P calls dont, let us know more details
10-22-2009 07:31 PM
Hi
We actually need the sip trunk connected to USA provider. Please refer to the below connection.
Phone --- PABX --- VG ----sip------ USA provider ---- PSTN
dial-peer voice 888891 pots
trunkgroup local
destination-pattern 2024491446
!
sip-ua
credentials username 2024491446 password ???????
hookflash-info
authentication username 2024491446 password ???????
no remote-party-id
set pstn-cause 47 sip-status 486
retry invite 2
retry response 3
retry bye 3
retry prack 6
retry options 0
timers expires 300000
mwi-server ipv4:x.x.x.x expires 3600 port 5060 transport udp
registrar ipv4:x.x.x.x expires 3600
sip-server ipv4:x.x.x.x
10-22-2009 11:15 PM
Ok which information your provider provided (username, password, etc) and what they expect (auth during invite, etc)?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide