Calliung CCM 4.2 and CME locations

Unanswered Question
Oct 23rd, 2009

I trying to determine the best method to route calls between a CCM 4.2 and CUE location. I have a Intercluster Trunk to route calls to the CME site via an MPLS network. In the event of a failure I want to end the calls over the PSTN. What would be the easiest method, AAR, multiple, Route Patterns, other? Your input is appreciated.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
cbreger_breger Fri, 10/23/2009 - 06:27

This I have done. How do set priority between Route-list containing the ICT and the PSTN.

Jaime Valencia Fri, 10/23/2009 - 06:35

Let's get something straight, an ICT is to connect 2 CUCM clusters. To connect a CUCM to a CME you need to configure the CME as an H323 GW. So there can't be an ICT in this config.

H323 1st element

PSTN 2nd element



if this helps, please rate

cbreger_breger Fri, 10/23/2009 - 07:02

You are correct I have a H.323 gateway configured to access my CME. I guess my problem is in building the Route Group, my H.323 GW is not listed as a possible element which I can choose. I only see my PSTN GWs


This Discussion