SNMP traps

Unanswered Question
Oct 23rd, 2009

Dear all,

I am using CCM 6.1. and In my network we are using third party NMS( Tivoli).

I want to send the traps for IP Phones to that NMS.

For that what I should configure in my CCM.

Ip attaching, what I have done for SNMP configuration in my CCM.

any body is there to help me out.

Thanks & regards


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jpinkus Mon, 10/26/2009 - 07:58

You have to enable clogNotificationsEnabled ( and then the traps will be sent to their destination as defined.


cisco.madhab Tue, 10/27/2009 - 08:07

Dear Joe,

Thanks for your reply.

can you tell me from which option I can enable that ClogNotification .

thanks & regards


jpinkus Wed, 10/28/2009 - 06:38

Hi Madhab,

For any dos prompt:

To enable trap (clogNotificationsEnabled) : snmpset -c public -v 2c i 1

To change the trap severity (clogMaxSeverity) : snmpset -c public -v 2c i 4

In above example last value 4 means set the severity to 4 (Error). In this example any syslog event with severity emergency(1),alert(2),critical(3),error(4) will generate the syslog trap.



This Discussion