10-23-2009 06:58 AM - edited 03-18-2019 10:46 AM
Dear all,
I am using CCM 6.1. and In my network we are using third party NMS( Tivoli).
I want to send the traps for IP Phones to that NMS.
For that what I should configure in my CCM.
Ip attaching, what I have done for SNMP configuration in my CCM.
any body is there to help me out.
Thanks & regards
Madhab
10-26-2009 07:58 AM
You have to enable clogNotificationsEnabled (1.3.6.1.4.1.9.9.41.1.1.2) and then the traps will be sent to their destination as defined.
Joe
10-27-2009 08:07 AM
Dear Joe,
Thanks for your reply.
can you tell me from which option I can enable that ClogNotification .
thanks & regards
madhab
10-28-2009 06:38 AM
Hi Madhab,
For any dos prompt:
To enable trap (clogNotificationsEnabled) : snmpset -c public -v 2c
To change the trap severity (clogMaxSeverity) : snmpset -c public -v 2c
In above example last value 4 means set the severity to 4 (Error). In this example any syslog event with severity emergency(1),alert(2),critical(3),error(4) will generate the syslog trap.
Joe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: