DHCP snooping

Unanswered Question
Oct 23rd, 2009
User Badges:

Hi to All,


I have multiple VLANs configured on a L2/L3 switch (cisco 3750) and one DHCP server configured on wan [using ip helper-address on the switch I forward the DHCP request on a L3 interface.


It' s possible / How can I enable dhcp snooping on the switch ?

It's possible / How can I configure the TRUSTED PORT (the port vs the DHCP server)



FOLLOWING THE CONFIGURATION:



SWITCH


!

!

interface GigabitEthernet1/0/1

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/2

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/3

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/24

description ** TO WAN ROUTER **

no switchport

ip address 192.168.254.254 255.255.255.252

!

!

interface Vlan2

description ** LAN **

ip address 192.168.2.254 255.255.255.0

ip helper-address 192.168.1.254

!

ip forward-protocol udp bootpc

!






IF I TRY TO CONFIGURE THE DHCP SNOOPING I CAN'T CONFIGURE THE TRUST PORT (on the "wan" interface):



SWITCH#conf t

SWITCH(config)#ip dhcp snooping vlan 2

SWITCH(config)#

SWITCH(config)#

SWITCH(config)#interface GigabitEthernet1/0/24

SWITCH(config-if)#ip dhcp ?

client DHCP client configuration

limit Limit DHCP Lease

relay DHCP relay configuration parameters

server Configure DHCP server behavior


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion